ECO Teardrop Banner

Category:

Our ECO “Economy” Teardrop Banner gives you the best of both worlds with the ultimate combination of size and savings. At 2.9m high, the ECO Teardrop banner is marginally shorter than our most sought-after size – the Medium Teardrop Banner – but wider, giving you a larger print area to play with.

These small changes make the ECO Teardrop Banner a popular VALUE FOR MONEY OPTION.

Description

The Eco Teardrop is rapidly increasing in popularity as it boasts the ultimate combination of size and savings. At 2.9m it is marginally shorter than our most popular size, the Medium Teardrop, but its increased width allows for a greater print area to showcase your brand!

Fluorescent Printed Fabric now available.

Our entire range of Eco Teardrop Banners incorporate these fantastic features:

  • Comes complete with:
    • Custom Printed Banner
    • Flexible, reinforced fibreglass Rod Set
    • Premium Carry Bag with compartment for ground spike
    • Ground spike or choose from a variety of banner bases for your desired use
  • Full Colour Digital Printing
  • Single Sided Printing
  • True Double-Sided Printing available for selected flying banners
  • Readily available replacement fabric skins
  • Lifetime Tip Rod Warranty
  • Easy to transport, assemble & take down
  • Variety of banner bases available according to desired use

Superior Quality

Superior Hardware:

  • Our strong fibreglass rods are designed to be flexible and are made to last with a lifetime warranty on all Tip rods
  • Our Tip Rod has a smooth, rounded tip, which helps prevent the rod from breaking through the fabric
  • Metal collars on the pole ends strengthen the rods and preventing them from splitting
  • The fibreglass’ special memory returns rods to their original position after bending inside the banner
  • Rotating ball bearing mechanism allows the banner to spin freely so no need to worry about the flag wrapping around the pole in the wind
  • All banner bases support our wide base rod, providing more strength in the rod system

Superior Printing: 

  • Superior quality Full Colour Digital Printing using the latest technologies
  • Single Sided Printing has an amazing 95% (approx.) bleed-through onto the reverse side
  • True Double-Sided Printing uses only 2 pieces of material with a block out coating on the inside to prevent transparency. Many manufacturers use 3 pieces of fabric, making the banner unnecessarily heavy and more susceptible to wind damage.

Easy Lock Tensioning System:

  • Tensioning is quick and easy thanks to our adjustable cord mechanism with easy-lock clip
  • Simply mount your Banner, adjust the tension using the cord, then lock the cord with the clip
  • The tension will need to be adjusted as the banner fabric stretches or moves to keep the banner taut and maintain optimum appearance

Superior Fabric:

  • Our knitted polyester fabric is much stronger than other woven fabrics
  • Higher quality print thanks to superior fabric
  • Rods feed easily through the banner thanks to rod pocket made from a heavy duty polyester fabric
  • The rod pocket, is triple stitched with 100mm reinforcing at the end of the sleeve, for additional reinforcing where it is needed most, preventing the tip rod from wearing through the fabric.

Assembly Instructions

Assembly Checklist

  • Tip Rod is at very end of the sleeve
  • Cord is tight and hooked securely
  • Banner is taut with no ripples
  • Base is secure

Assembly Instructions

  1. Place your banner base into position. If using a ground spike, use a mallet to drive the spike into the ground.
    DO NOT hit the rotating spindle when driving the spike into the ground.
  2. Insert the rounded end of the Tip Rod into the opening of the black sleeve, joining the rods securely, one at a time, as you feed them into the sleeve.
  3. Ensure that the end of the Tip Rod goes to the very end of the reinforced sleeve. If the Tip Rod is not at the end of the reinforced sleeve this can cause damage to your banner.
  4. Adjust the cord at the bottom of the banner, so that the Tip Rod is held securely then attach the cord to the collar on the bottom pole.
  5. Place the banner onto the base and adjust the banner tension with the cord. Too much tension will cause ripples in the banner.

General Care Instructions

  • For optimum appearance and durability, ensure that the tension is set correctly so that your banner is taut
  • Ensure that the Tip Rod is fed through right to the end of the sleeve
  • Check that the banner is clear of obstructions that it may rub against such as walls, trees and especially electrical wires
  • If using a ground spike, make sure the ground is free from rocks, pipes etc. and avoid hitting the rotating spindle
  • Take down your banner at night or in winds exceeding 50 km/h to greatly increase its lifespan
  • To clean your banner fabric (advised), rinse with warm soapy water, then wash out the soap with clean water and assemble to dry naturally before packing away (do not pack away wet)
  • Contact us for any spare components required including cords, rods, bases and reprint fabrics

Reviews

There are no reviews yet.

Be the first to review “ECO Teardrop Banner”

Your email address will not be published. Required fields are marked *