Backpack Banner

Take fashion to a new level with a wearable Backpack Banner from Portable Pop-Up Marquees, allowing you to showcase your brand anywhere, from a busy street to a crowded event!

Simply slide the pole through the banner sleeve and attach to the backpack and your Backpack Banner is ready to go in seconds. It is now ready for you to wear and showoff your brand wherever you go, and can be stored away easily in the carry bag included. Its lightweight materials make it comfortable to wear, with adjustable straps so anyone can use it.

 

Parts Included:

  • Custom Printed Banner
  • Rod set
  • Backpack
  • Carry Bag

Printing

  • Teardrop, Feather, or Rectangular Vertical shapes available
  • Full Colour Digital Printing
  • Single or Double-Sided Printing
  • Replacement fabrics available
  • Tensioned fabric ensures that the banner always looks its best

Superior Quality

Superior Hardware:

  • Our strong fibreglass rods are designed to be flexible and are made to last with a lifetime warranty on all Tip rods
  • Our Tip Rod has a smooth, rounded tip, which helps prevent the rod from breaking through the fabric
  • Metal collars on the pole ends strengthen the rods and preventing them from splitting
  • The fibreglass’ special memory returns rods to their original position after bending inside the banner
  • Rotating ball bearing mechanism allows the banner to spin freely so no need to worry about the flag wrapping around the pole in the wind
  • All banner bases support our wide base rod, providing more strength in the rod system

Superior Printing: 

  • Superior quality Full Colour Digital Printing using the latest technologies
  • Single Sided Printing has an amazing 95% (approx.) bleed-through onto the reverse side
  • True Double-Sided Printing uses only 2 pieces of material with a block out coating on the inside to prevent transparency. Many manufacturers use 3 pieces of fabric, making the banner unnecessarily heavy and more susceptible to wind damage.

Easy Lock Tensioning System:

  • Tensioning is quick and easy thanks to our adjustable cord mechanism with easy-lock clip
  • Simply mount your Banner, adjust the tension using the cord, then lock the cord with the clip
  • The tension will need to be adjusted as the banner fabric stretches or moves to keep the banner taut and maintain optimum appearance

Superior Fabric:

  • Our knitted polyester fabric is much stronger than other woven fabrics
  • Higher quality print thanks to superior fabric
  • Rods feed easily through the banner thanks to rod pocket made from a heavy duty polyester fabric
  • The rod pocket, is triple stitched with 100mm reinforcing at the end of the sleeve, for additional reinforcing where it is needed most, preventing the tip rod from wearing through the fabric.

Assembly Instructions

Assembly Instructions – General

  • Place your banner base into position. If using a ground spike, use a mallet to drive the spike into the ground.
    DO NOT hit the rotating spindle when driving the spike into the ground.
  • Insert the rounded end of the Tip Rod into the opening of the black sleeve, joining the rods securely, one at a time, as you feed them into the sleeve.
  • Ensure that the end of the Tip Rod goes to the very end of the reinforced sleeve. If the Tip Rod is not at the end of the reinforced sleeve this can cause damage to your banner.
  • Adjust the cord at the bottom of the banner, so that the Tip Rod is held securely then attach the cord to the collar on the bottom pole.
  • Place the banner onto the base and adjust the banner tension with the cord. Too much tension will cause ripples in the banner.

Assembly Instructions – Vertical

  • Place your banner base into position. If using a ground spike, use a mallet to drive the spike into the ground.
    DO NOT hit the rotating spindle when driving the spike into the ground.
  • Insert the shortest rod through the horizontal sleeve at the top of the banner
  • Next, insert the top rod into the long vertical sleeve along the side of the banner, attaching the remaining rods as you go until the top rod is at the very end of the sleeve
  • Join the top vertical and horizontal rods so that they form a secure right angle
  • Attach the cord at the bottom of the banner to the collar on the bottom pole. Place the banner onto the base and adjust the banner tension with the cord. Too much tension will cause ripples in the banner.

General Care Instructions

  • For optimum appearance and durability, ensure that the tension is set correctly so that your banner is taut
  • Ensure that the Tip Rod is fed through right to the end of the sleeve
  • Check that the banner is clear of obstructions that it may rub against such as walls, trees and especially electrical wires
  • If using a ground spike, make sure the ground is free from rocks, pipes etc. and avoid hitting the rotating spindle
  • Take down your banner at night or in winds exceeding 50 km/h to greatly increase its lifespan
  • To clean your banner fabric (advised), rinse with warm soapy water, then wash out the soap with clean water and assemble to dry naturally before packing away (do not pack away wet)
  • Contact us for any spare components required including cords, rods, bases and reprint fabrics

Reviews

There are no reviews yet.

Be the first to review “Backpack Banner”

Your email address will not be published. Required fields are marked *

You may also like…